As the automobile's core ,the engine is improving with high efficiency, so to the water pump bearing, we need more high requirements, for example, more load, and more high anti-heat, and better seal.
SLS-water pump bearing is that new style of bearing fitting for these requirements. In the fact, it is a kind of simple double-load bearing. The double-load bearing has no inner ring, the race-way of roller is on the shaft directly. The two load bearing forms a whole , both side of the outer ring sealed with seal . At the same load condition, the size of radial load is smaller than other bearings. And the same axial load condition, the ability of load is high than other bearings. Because of good-hard ,high accuracy of rotate, simple structure, and easy dismounting, many countries, like AMERICA, JAPAN, and GERMAN all use this kind of structure. SLS develops all kinds of water pump bearing and they are used in automobiles that made in our China.
Water pump is formed by outer ring, water pump bearing, anti-water seal, impeller, fan and rollers. water pump bearing is the most important part of the water pump. Because the high speed of revolution, usually it reaches 9000r/min, it requires the high-load ability of water pump bearing. And only this can guarantee the life of bearing under the high speed revolution. Because of the limited space, bad operation condition, the water pump bearing should assure the normal revolution requirement, and the same time can decrease the bearing's ability of load. It is difficult for the seal of bearings , beacuse the reliability and the wear ability of the bearing will effect the usage of the bearing. Totally, loading ability, operating seal and operating clearance, are the importand factors effecting the capability of the bearing.
The size of the water pump bearing has never a standard. To satisfy with different requirements.