| • PRODUCT >> Hard Steel With Special Treatment Slide Bearings |
| |
 |
Feasure |
 |
High load capacity over 150N/mm2, Suitable for rotary and oscillating movement, lower maintenance requirements due to long re-lubrication intervals, excellent wear resistance under high load with lower speed, 5. Good resistance to shock loads, good characteristics when operating in the presence of abrasive media or dirty environment..
Initial pre-lubrication at assembly required...
We can supply the parts as your detail drawings. |
|
| |
|
Structure |
|
| |
|
|
| |
 |
Carbon steel machined slide bearings, the oil groove can be produced according to the bearing work condition if needed. The bushes have been treated by special techniques have high load capacity with lower friction and excellent wear resistance.
 |
|
| |
|
Typical Application |
|
| This type of bushing is widely applied in hoisting machines and other construction machines, automobiles, tractors, trucks, machines tools and some mineral engines, agriculture machines ,refuse truck, plastic machines, steel industries etc. |
|
| |
|
Tech.Data ... |
|
| Max.Load |
Static |
250N/mm2 |
Hardness |
HRC>50 |
| Dynamic |
150N/mm2 |
Elongation |
15% |
| Max.Speed |
O.6m/s |
Temp. |
-100oC~+200oC |
| Max.PV |
1.2N/mm2﹡m/s |
Frictioncoefficient |
0.05~0.25 |
| Tensilestrength |
4OON/mm2 |
Thermalconductivity |
60W(m*k)﹣1 |
| Yieldpoint |
300N/mm2 |
Coef.ofthermalexpansion |
15*10﹣6K﹣1 |
|
|
| |
| |
|
| |
| |
